RF-Analyser HFE59B Analyzers High-Frequency

RF-Analyser HFE59B Analyzers High-Frequency Frequency range from 27MHz-2.7GHz
RF-Analyser HFE59B

Detector fields and electromagnetic radiation

The set based on HF59B model offers with its ca. 93 dB, and an extraordinary dynamic resolution. The innovative overview of the features of the basic instrument HF59B, in combination with the frequency response of the broadband UBB27 model, offers excellent HF analysis possibilities. Functions and tailored equipment for green building requirements. Thanks to its price relatively advantageous, however, it is often also used in science and industry, and more specifically in the field of electromagnetic compatibility for the environment and the development of the products (precompliance).

 HF59B model kits and wide range of accessories:

• Horizontal isotropic ultra-wideband antenna UBB27_G3 from 27 MHz to far beyond 3.3 GHz (limited by the frequency response of HF59B model)
• High-pass filter from 800 MHz HP800_G3 for suppression of low frequencies in the measurement with the LogPer antenna HF59B model
• Amplifier HF HV10_27G3: increases the resolution by 10 dB (= factor 10) - important for lowering increased rustle of permanent fund in the radar / UMTS user mode
• attenuator DG20_G10: increases the maximum measurable value of 20 dB or a factor of 100 to 1999 mW / m² (1,999 W / m²)
• Plastic case with foam plastic insert for safe transport of all components. It offers enough space for an additional measuring tool Gigahertz-Solutions (HF or LF).
Standard Equipment
• HF59B Device
• Directional Antenna LogPer interlocking with cable and UBB
• Internal Battery NiMH
• The supply device to the network / charge
• High-pass filter HP800
• High-frequency amplifier (HF) HV10
• Attenuator DG20_G10
• Various adapters
• Detailed Instruction Manual

Technical specifications
• Frequency range: 27 MHz - 2.7GHz
• Measurement Range: Power flux density: 0.001 to 1,999,000 μW / m² (= 1 nanoW / m² nominal resolution of up to 1,999 W / m², in case of use with a preamplifier and attenuator)
• Accuracy: Basic accuracy including linearity error: +/- 3 dB. Zero offset and especially digitization error ( "rollover"): +/- 5 digits
• Sensor: 2 antennas: Optimised logarithmic-periodic antenna measurement with a frequency response compensated directly on the antenna. minor ripple, lower deviation detection, improved shielding downward, continuous control of the operation
• Acoustic Analysis: The acoustic signal in frequency modulation and proportional to the field allows the identification of sources of radiation in pulses (GSM, DECT, etc.) And the identification of further exposures
• Power supply: 9 Battery NiMH high-performance 9.6-volt (included in the package), average duration of operation: 7-8 hours. Indication Low Batt., Auto Power Off (does save power and turns off in the long-term measurements)
• Signal Rating: Display of peak and average values ​​and 'lock function of the peak values' ( "Peak Hold"). quantitative differentiation of the radiation pulse and no pulse (patented switching)
• Signal outputs: AC (demodulated signal, calibrated) and scalable DC output
• Warranty: 2 years
• Weight: 2.1 kg.