METAL DETECTOR GAUSS MD PRO MD MARS

METAL DETECTOR GAUSS MD PRO MD MARS

The GaussMD metal detector is a modern professional metal detector with direct digital signal processing (DSP). This means that the signal from the sensor is digitized and already processed within the microcontroller. This solution eliminates the typical limitations inherent in analog metal detectors and also allows you to reduce the amount of interference, increase sensitivity and search depth, provide flexibility in settings, etc.

GaussMD was developed by engineers of the Ukrainian company M @ rsMD. Unique technologies and features are implemented in the metal detector that make it an uncompromising choice for a professional search engine:

• CLEAR ID technology is a complex of additional digital processing of the received signal in order to reduce the influence of the ground on the accuracy of target identification.

• Two operating frequencies 16 and 48 kHz with the ability to compensate for each frequency.

• MDLink wireless communication system, with the transmission of audio on a broadcast channel without time delays with the highest quality.

• Three modes of operation (An) real-time targeting, (cL) fast digital processing and (CL) full digital processing.

• Flexible setting for different search conditions: (Lo) for sandy soils with low mineralization, (no) suitable in most cases for all non-wet and weakly active soils, (hi) and (Hi) recommended for use on soils with strong mineralization, large irregularities, high humidity.

• Automatic and manual ground balance.

• Runtime from a single battery charge is approximately 24 hours, which is a record at the moment.

• High noise immunity and minimum number of false alarms compared to other professional metal detectors.

• Weight and construction ergonomics, the best at the moment among all metal detectors.

• Wide range of search sensors.

• IP64 protection.

• 24 month warranty.

The Gauss MD PRO set includes:

• Easy-to-read control panel that can be easily removed from the shaft and hidden, for example, in a pocket.

• Ergonomic aluminum rod with retractable carbon end for fixing the plate.

• High quality wired headphones with 1/8 ”jack and a 1/4” jack adapter.

• MDLink wireless module.

• USB / mini USB cable to charge the wireless module.

• USB cable with magnetic tip for charging the detector.

• Wall charger with 2 USB sockets.

• Set of 4 o-rings.

• Screw with nut for fixing the plate (3 pcs).

• Discovery 13 ”DD plate with cover plate and protective cap for the connector.

• 7 ”round DD plate with protective cap for connector.

• Pinpointer M @ rsMD in black.