SecurSCAN Scanmail

SecurSCAN Scanmail

Control system post.


The SCANMAIL detects all devices regardless known detonating the explosive used. The criterion of operation, in fact, is that of the metal detection, necessarily present in an explosive device, and not that of the analysis of "fumes" of explosive materials.
 It is programmed to signal alarms automatically for all packages that might contain potentially dangerous objects, ignoring metal components normally used in the correspondence such as staples or paper clips. This high selectivity allows not reduce the capacity of detection of metal objects really dangerous.
 The sensitivity is calibrated in origin from the manufacturer and can not be changed by the user. It equipped with special card "test" to check the correct operation of the equipment. The SCANMAIL is normally powered from the mains voltage (220/110 V) and contains an internal battery in case of main power failure.
 Moreover, all the detection circuits are redundant, so as to allow operation even in case of failure.
 Compact and portable, it can fit on a common desk in the same space of a printer.
 It is completely safe and will not damage camera film, magnetic tapes or computer disks. They can be controlled by the thickness parcels maximum of 6 cm.
 The use of SCANMAIL does not require specialized training, in fact, the control panel is very clear in its essential functions and plans, as well as the operating buttons and their spies, appropriate reports of self that facilitate maximum management.

Technical specifications
• Main Power: 110 / 220VAC - 50 / 60Hz
• Secondary Power supply: 12Vdc
• Batteries: Lead Acid maintenance free.
• Operation Batteries: more than 4 hours.
• Charge Time: 8 hours.
• Dimensions: 420 x 446 x 228 mm. (Unpacked)
• Weight: 9 kg
• Operating temperature: -30 to + 40 ° C