UPS PXN080

UPS PXN080

On-line double conversion 100% Sinusoidal 6.5 ~ 10 KVA
The UPS PXN080, is from 8 KVA with selectable input Three-phase or single-phase and single-phase output, with on-line double conversion (VFI): The load is powered by the inverter, which supplies a filtered and stabilized sinusoidal voltage, voltage , shape and frequency, in addition, the input and output filters considerably increase the immunity of the load against mains power disturbances and lightning strikes.
For technology, the features ( "Economy Mode" and "Smart Mode" selectable), diagnostics (standard LCD display, USB and RS232 interfaces with UPSMON software, EPO contact and slots for network interface) PXN080 is the best solution for powering sensitive and vital "mission critical 'networks and security applications (electromedical) maximum reliability.
Important Note the simple installation: the UPS can be connected both to single-phase input and three-phase network.
The UPS PXN080 complies with latest RoHS directives.
filtered stabilized and reliable voltage (On Line double conversion technology (VFI compliant EN500913) with filters for the suppression of atmospheric disturbances.
Simplified installation with the ability to connect the UPS both single-phase and three-phase network and the terminal block connections both inbound and outbound, and the convenience of two auxiliary sockets for powering local utilities.
Suitable for the supply of IT and industrial loads, thanks to the power factor of 0.8.
Low consumption (function "Economy Mode" and "Smart Mode" to increase the efficiency (up to 98%): (1) "Economy Mode": Allows you to select Line Interactive (VI) technology to power mains, shortly loads sensitive, in some periods. the function can be programmed by software or set manually from the UPS (2) "Smart Mode": if the network is out of range, the UPS will power the load from the inverter. When the mains returns within tolerance, the 'UPS performs, for a certain period, the diagnosis of the network before switching the load.
Very low noise level of less than 40dBA.
deactivation of the bypass for operation as a frequency converter (at 50 or 60 Hz).
sinusoidal absorption digital electronic rectifier enables: (1) high efficiency (THDi <5%) (2) small size (integrated UPS) (3) high reliability (4) high performance.
High reliability UPS thanks to: (1) Total microprocessor control (2) static and manual bypass without interruption.
High reliability with automatic and manual battery test batteries.
High reliability with automatic and manual battery test batteries.
Emergency mode can be set to operate only when mains power fails (for emergency lighting).
Power factor correction UPS input factor close to 1.
Diagnostics were Evolved, measurements and alarms available on the standard LCD display.
Possibility of digital update of the UPS performance via USB or optional network card

Features:
- Nominal Power 8 kVA
- Battery life Typical 15 min.
- Dimensions HxWxD 62x28x78 cm.
- Weight 100 kg.

Download PDF