C.Scope MXT2 Transmitter

C.Scope MXT2 Transmitter

DTMF transmitter 33 + 131-8kHz-512Hz


MXT2 works alongside locator MXL2 increasing performance. Used to establish the depth of any detected pipe or cable.
 The multifrequency operating signal and the adjustable output make this combination extremely effective.
 Used in direct connection with the Pushcable copper core 3D-R will allow you to make full tracing of a PVC pipe.

CHARACTERISTICS
The generator operates exclusively in C.Scope MXT2
conjunction with the locator MXL2 increasing the
performance and is used to establish the depth
of any child in the service detected.
The multifrequency operating and the output signal
adjustable make this combination a system
cercaservizi extremely effective for localization
pipes and cables in various sites and construction sites.
MXT2 uses a frequency of 33 simultaneous 131kHz +
for the most common searches like small underground services
such as fiber optics, telephone lines and lights
road markings for the 8kHz long and deep,
and the extremely low 512 / 640Hz for tracing
specifications.
The output power of 1 Watt, helps in getting signals
also services the deeper and less conductive, also
adjusting the power level to four positions,
allow the operator to control the amount of
energy use in operations.
MXT2 allows you to select the output signal, Continuous
or Pulse, selectable via a button,
feature very useful if you work in places rich
interference.
The transmitter MXT2 used in combination with the new
MXL2 locator provides a major step forward in
speeding up the work, thus reducing the
daily risk of accidents on the construction site.
MXT2 offers three different modes of application
signal:
DIRECT CONNECTION
It allows you to draw individual tubes or cables, identify and
learn the depth at which they are located. The use of
Signal Injector Clamps and make this method the most
effective to determine the exact location of a service.
INDUCTION
not being able to take advantage of a direct connection, this
mode allows the transmitter to radiate MXT2
a signal in the subsoil, which will be propagated to a
if this sub-service, and will be intercepted by
MXL2 locator.
WRAP
if that is impossible
to use the
Direct Connection
or induction, this
technique can be
used with
success to track
networks of cables on the road.

Technical specifications
• 1 Watt output power adjustable in four levels
• 3 output signals:
 - Signal + 33 simultaneous 131kHz
 - Signal to 8 kHz
 - Signal 512 / 640Hz
• Output signal pulsed or continuous
• 3 application techniques signal
 - Direct connection
 - Induction
 - Enveloping
• Display high resolution LCD
• Accessory compartment with included:
 - Cables for direct connection
 - Earthing
 - Magnet free
 - 10 mt. Cable ground auxiliary
 - Manual
• Self-calibration

MXT2
• 1 Watt output power adjustable
in 4 levels
• 3 output signals
- Signal + 33 simultaneous 131kHz
- Signal to 8 kHz
- Signal 512 / 640Hz
• Output signal pulsed or continuous
• 3 application techniques signal
- Direct connection
- Induction
- Enveloping
• Display high resolution LCD
• Accessory compartment
• No calibration required
• Warranty 3 years