LF-Analyser ME3030B Analyzers Low Frequency LF They detect Low Frequencies from 0.5 Hz to 1 MHz Frequency range of the LF-Analyser ME3030B 16 Hz - 2 KHz Detector of magnetic and electromagnetic fields
Ideal for those who are technically proficient without being a professional. For the simple exposure assessment. For targeted determination of reorganization measures and the monitoring of their effectiveness. This basic tool of the series offers all the "common benefits", including: • Show the total load in the relevant frequency range without the necessity for any calculation. • The measured values are displayed directly in the units of estimates values of green building. • An acoustic signal proportional to the field strength with "Geiger counter effect" helps to identify areas with higher load. • Electric field strength: 1-1999 V / m (usable also without voltage against the ground potential). • magnetic flux density: 1-1999 nT. Standard Equipment • LF Device Analyser ME3030B • Grounding Cable • Alkaline Battery • Multilingual Manual Technical specifications • Frequency range: 16 Hz - 2 KHz (compensated, better than -2 dB). • Measurement Range: Magnetic flux density (one-dimensional): 1-1999 nT. Electric field strength: 1-1999 V / m • Accuracy: +/- 2%, +/- 20 digits @ 50/60 Hz • Sensor: E field sensor for alternating electric fields BF. H field sensor for alternating BF magnetic fields (one-dimensional) • Acoustic Analysis: acoustic signal proportional to the field (with "Geiger counter effect" that can be activated) • Power: Battery E-Block 9 V alkaline manganese (included in the package), average duration of operation: 24-36 hours (depending on the operating mode). Indication Low Batt., Auto Power Off function • Signal Rating: RMS • Warranty: 2 years • Weight: 0.41 kg.