As you can guess from the name is the dedicated Deteknix metal detectors for people who want to make a specific search of the precious metals, the first of the gold. The metal detector Deteknix Quest Gold working frequency is 19kHz. The research will take place both in the All Metal mode and in Discrimination. The ground balancing can be done both automatic and manual manner. The detector also allows the sensitivity adjustment, the threshold and to use one of the preset search programs. The Deteknix Quest Gold features an LCD display that allows you to constantly monitor all the information of interest to the researcher during the research. you can adjust the sound volume, monitor the state of charge of the batteries and displaying on screen the numeric ID corresponding to the metal just identified. The metal detector has pinpoint and comes with wireless headphones, so you can use wireless headphones. The search coil is waterproof and has a 5,5x9x5 "TurboD Waterproof Coil (14x24cm). The power supply is provided by an internal battery type Li-Po 2000mAh which allows a range of about 30 hours if the speaker sound is used and about 20 hours if you use wireless headphones. The Quest Gold is formed by two rods. It can be mounted along the 80 cm to 130 cm.
DATA SHEET
OPERATING FREQUENCY: 19 kHz
TYPE OF RESEARCH: Motion
BALANCE OF THE SOIL: Automatic
BALANCE OF THE SOIL: Manual
SEARCH IN: Discrimination
SEARCH IN: All Metal
SENSITIVITY ADJUSTMENT: Yes
SETTING DISCRIMINATION: Yes 99 detection ID
ADJUSTING THRESHOLD: Yes
PINPOINT: Yes
PROGRAMS PRE-SET: 5
INDICATION TYPE OF METAL DETECT: Yes
INDICATION OF SOIL MINERALISATION: Yes
TONE DETECTION: Yes 6 variables tones
DISPLAY: backlit LCD 60X70mm
PLATE OF SEARCH: 5.5 × 9.5 "(14x24cm) TurboD Waterproof Coil
INTERNAL SPEAKER: Yes
POWER SUPPLY: Internal Battery 2000mAh Li-Po
AUTONOMY: Approximately 30 hours with audio speakers, about 20 hours with wireless headphones