EDS DETECH

EDS DETECH
The brand new "eds" is the creation in utima Detech home.
The Bulgarian house is the biggest producer in Europe with over 20 combined workforce, famous throughout the world for its plates can improve the performance of any metal detector has decided to independently produce a detector and, using the best plates it produces with the most modern electronics market and powerful NOTES COINS a 55-60 CM unattainable by any other detector "better" then thus imposing "around" a detector that would enhance all the features.
The project is extremely innovative and excellent results in terms of depth, discrimination, cleaning of the signals are amazing! It detects coins 55-60 cm vedansi videos listed below and comparative tests with other metal detector industry
comparison of depth eds and other normal equipment
in the air detech eds it detects coins 55-60 cm while other devices do not reach these depths,
and under the earth the special magnetic field penetrates the soil much better than other metal detector de market
The EDS is a VLF metal detector operating in single frequency to 14 kHz, molded into shapes with an attractive design is finished with finishing dedicated to a comfortable use and a good load distribution, excellent building materials, guarantee a good use even in conditions difficult. The thing that most attracts the seeker at first glance is certainly a SEF PRO white plate mounted in bellamostra. This coil belongs to a new series of "plates butterfly" dated 2012, more structurally resistant and more suitable for use with high frequencies. They differ from other elliptical sef for their symmetry that enables you to create more regular fields
With regard to the frequencies ...... the metal detector eds has been designed to work with an operating frequency to 14kHz, in detail this frequency makes it much more sensitive to subtle objects, while providing increased sensitivity to metals from less powerful signal as precisely small valuables and ancient coins.

A frequency so high it would be a problem in the management of the signals, so it has been introduced a microprocessor able to manage everything thus managing to optimize the discriminative abilities, the penetrative capacity and the 'use of filters for the elimination of interference present in the research areas.
Noteworthy are also the care and the results just in 'Optimization of signals and in' fault rectification. Let's see them together in detail:
The use of a PRO SEF plate to 9 "x9" butterfly with its particular structure is perfectly symmetrical and improves the quality of the magnetic field generated and consequently also the signal to be analyzed, also creating a wide form of field "blade" thin concentrated in the lower part of the plate is less sensitive to environmental disturbances, and is less subject all'inqunamento search caused by false signals.
The possibility to vary the frequency minimally choosing between two default settings (and therefore already optimized) allows to immunize searches from the most electromagnetic interference (known as EMI), generated by the current flow and thus present in the vicinity of houses, power lines , telephone, antenna repeaters etc.
The use of two filter functions, high and low, allows a greater adaptability to all research situations. By setting on high it is able to make in high performance metal detector, on low you maintain a high sensitivity in the event of persistent symptoms such as at the shoreline or in areas where there is a strong mineralization. This low filter cleans the signal, also helping the discriminator, in the presence of constant disturbances can not be eliminated with the balance as or not attributable to it or because the operation would be much too extreme to desensitize the search set apart. (You will realize the importance of this command especially looking jewelry at the beach in all metal mode, in this context, in the absence of a signal discriminator ready to intervene in your help, the low control will help a lot!)
 The excellent discriminator will allow (operating in "disk mode") to eliminate all unwanted signals, allowing them to stabilize the background buzz (tresold) to the most appropriate sound.
The adjustable treshold is an indispensable aid for the more experienced searcher, to distinguish a false signal from a sound signal. It 's remarkable the speed and responsiveness of this tool in being able to reset as soon as the discriminator threshold kicks in and a constant return it as soon as the unwanted object has been exceeded. A trained ear could detect even deeper objects from the simple increase in the trshold sound, but the depth of detection are already such that I would not recommend this delicacy if not really "interesting places";).
 Finally, always with regard to 'elimination of interference, last but not least, the balance to the ground, which can be automatic for an' immediate operation or manually settable for extreme precision. Testing by the automatic balance was perfect in all search contexts, only a manual balancing shoreline has led to more research serenity.
At this point it is fair to ask why focus so much attention and care in the management of the signal and why our part so carefully in 'highlight ...... surely who hangs out in the "world of the detector" knows that extremely powerful tools there are many, all instruments they do speak, devices that invite to 'purchase, but inevitably after a few months after they exit saturate the market of' used and often remain unsold in the garage or in oubliettes some users unfortunate because powerful but impossible to use. These are tools that are not able to manage mineralized soils, unable to look for in the foreshore, unmanageable in the presence of a simple mobile phone which sounds .... Here, precisely for this reason, optimal management of disorders of your metal detector will allow you to enjoy your purchase, enjoy it for a long time and do not regret a misguided impulse buying!