GOLD EXP5000 OKM MAGNETOMETER

GOLD EXP5000 OKM Magnetometer

N.B .: for buying this metal will only accept payment in advance
Metal detectors for the detection of metals in the subsoil, which allows to identify metals without the need for digging. It detects gold, silver, copper, aluminum, ferrous metals and all kinds of metal. The detection of a target may be acoustic, with graphic analogue, with digital or graphic with the light signal in the form of a curve on the display. EXP5000 measure anomalies in the subsurface, then is able to detect cavities, buried objects, water deposits, mineral deposits. This tool includes the best search technology known today. Through the glasses provided, the user sees what crawls, these special glasses are designed both for night searches, both for daytime search with anti-reflective solar system.

 EXP5000 is a metal detector with advanced technology contained in a small box very light and handy controls, allowing good measurements with 256MB memory. All collected data can be displayed on the computer and analyzed using three-dimensional software, with added features (date, time, probe used, etc.) and the detection location with GPS satellites to 24, then return to the site of the scan will be extremely easy and precise. EXP5000 comes with 50 cm probe mounted on a telescopic pole, you can fit a wide range of optional accessories, or as the EXP5000 Pro version, have them included. EXP5000 has the following functions use.
• Magnetometer - for the detection of ferrous objects.
• Ground Scan - Color representation of detection with three-dimensional resolution.
• Discrimination - can recognize and filter the ground to detect only precious metals like gold and silver, copper, etc. Special probes are available both for the discrimination of metals, for both the right of the metal identification detected.
• Metal detector - metal detection function
• Live Scan - shows real-time scan you're running.
• Thermograph - shows temperature variations of the subsurface
• Thermo Scan - creates infrared images with three-dimensional system

Magnetometer
 With the integrated magnetometer you can search magnetic masses in the ground. Also useful for detecting small objects on the surface, the maximum search depth is approximately 2 meters on. The magnetometer function can be used with the following probes:
• GPR 25cm - 50cm - 75cm - 100cm
• Super Sensor
• Antenna for tunnel
• Livestream Sensor

     EXP5000 Ground Penetrating Radar is complete the following accessories depending on the model.

Ground Scan
 The Ground Scan mode can be adjusted individually, and creates a 3D graphical display. You can store up to one hundred scans with the signal detection GPR to return exactly in place to accurately search. It allows to form three-dimensional scans, showing the depth and many other information up to 25 meters.

Livestream
 A new feature is the system Livestream allows you to analyze the soil with a 4x resolution.

Ground Scan
 The Ground Scan can be used with the following probes:
• GPR 25cm - 50cm - 75cm - 100cm
• Super Sensor
• Antenna for tunnel
• Livestream Sensor

 
Metal Detector
 In this function you have a metal detector with high performance with metal discrimination. The iron objects of detection performance, gold, silver, aluminum, etc. They are approximately 2 meters. The function of the metal detector can be used with the following probe:
• DDV System

Discrimination
 By using the Super Sensor, you can distinguish between noble and ferrous metals and detect cavities. Discrimination of metals can reach 25 meters deep. The metal detector function can be used with the following probe:
 Super Sensor
  
thermograph
 With the detection of the variation of the temperature of the surface of the ground, it is possible to detect anomalies based on hot or cold areas. The FS Thermograph help detect and locate abnormal soil. The Thermograph function can be used with the following probe:
 FS-Thermograph

thermoscan
 With the detection of the variation of the temperature of the soil research, FS-Thermoscan provides a graphical color scanning based on thermal variations. All thermal disturbances will be located and scanned on the display. The Thermoscan function can be used with the following probe:
 FS-Thermoscan
  
Livestream
 The Livescan system displays the captured images directly on the underground dell'EXP5000 glasses. lLampiezza of the probe is 50 cm. Detection is up to 25 meters. The Thermoscan function can be used with the following probe:
• Livestream Sensor

 
 The following technical indications are medial values. During the search small variations are possible.

Features of Control Unit
• Operating Temperature: 0 ° C / 50 ° C
• remittance Temperature: -20 ° C / 60 ° C
• Air humidity: 5% / 75%
• Water resistance: no
• Dimensions: 8 x 13 x 18 cm
• Weight: about 2 kg
• Voltage: 9.6 - 14.4 VDC, 22W maximum
• Safety class: IP40
• Research Range at 25 ° C: about 3 hours
• protected by glass Display: 640 x 480 Pixels, Colors
• Processor: 300 MHz Prozessor, INTEL i586-compatible
• RAM: 256 MB RAM
• Data Memory: 256 MB
• Answer: audio and visual
• Maximum detection: 25 meters
•

Data transmission (USB)
• Technology: USB
• Maximum data scanning: 19200 Baud


Minimum requirements for the computer
 The computer is not supplied, the values ​​given help to find the most suitable PC all'EXP5000. The computer is essential to analyze the scans, you can filter signals, eliminating the mineralization, recognizing cavity and metals, all this through a special three-dimensional software.
• CD-ROM Drive: Minimum 4x
• Interface (Data transmission): USB
• Free Disk Space: 50 MB
• Available memory (RAM): 256 MB
• Graphics: 128 MB, OpenGL-compatible
• Processor: minimo1.2 GHz
• Operating system: Windows Vista, XP, 98SE, 2000

UNDER THE ACCESSORIES WITH THE DIFFERENT VERSIONS